随着济南房地产的发展，近期电缆桥架的需求真是直线上升，那么在进行电缆桥架的整体施工建设当中，需要注意什么，才能保障工程进度。

　　With the development of real estate in Jinan, the demand for cable tray has really risen in a straight line in the near future. So what should be paid attention to in the overall construction of cable tray to ensure the progress of the project.

　　电缆桥架装置负载支撑点间隔不应超过容许负载和支撑跨度。挑选电缆桥架总宽时要留出一定的预留位置，便于为日后增加电缆线用。当电线电缆和变频电缆较较少时,可同一电缆桥架组装,但正中间得用挡板将电线电缆和变频电缆分隔铺设。

　　The spacing of load support points of cable tray device shall not exceed the allowable load and support span. When selecting the total width of cable tray, a certain reserved position shall be reserved for the convenience of adding cables in the future. When there are few wires and cables and frequency conversion cables, they can be assembled on the same cable tray, but the wires and cables and frequency conversion cables must be separated by baffles in the middle.

　　电缆桥架水准铺设时，桥架的连接头应尽可能设在跨度的1/4上下处,水准方向的电缆线每过2米长固定不动一下，竖直方向的电缆线每过1.5米长固定不动一下。电缆桥架的选择常见注意事项。

　　When the cable tray is laid horizontally, the connector of the bridge should be set up at the top and bottom of 1/4 of the span as far as possible. The cable in the horizontal direction should be fixed every 2 meters, and the cable in the vertical direction should be fixed every 1.5 meters. Common precautions for selection of cable tray.

　　电缆桥架设备除需屏蔽掉装防护罩外，在户外组装时要则在高层改装防护罩，避免日晒日晒雨淋，对如果需要电焊焊接安装中，焊接件四周的焊缝厚度应不小于原材质厚度，焊缝要进行防锈处理。

　　In addition to shielding off and installing protective covers for cable tray equipment, the protective covers shall be refitted at the high level during outdoor assembly to avoid exposure to the sun and rain. If electric welding is required for installation, the weld thickness around the weldment shall not be less than the thickness of the original material, and the weld shall be subject to rust prevention treatment.

　　总的来说，电缆桥架在铺设搭建时，都需要严格执行，防止发生意外。如果你正在寻找电缆桥架厂家的话，不妨来我们苏鑫了解一下吧，附带安装哦。

相关文章：济南电缆桥架