首先在选择济南电缆桥架厂家时，重要的是要考虑重量(负载，在一定的跨度内支持)。在架空缆索架或梯子的情况下，跨度为这些梯形之间的距离，与电缆支撑产品的整体长度相分离。

　　First of all, when choosing Jinan cable bridge manufacturer, it is important to consider the weight (load I you want to support in a certain spanHold). In the case of overhead cable frames or ladders, the span is the distance between these ladder forms, which is separated from the overall length of the cable support product.

　　在很多情况下，你想要的负载越高，允许的大跨度就越短，因为更短的跨度可以支撑更多的体重。较短的跨度也会导致较少的偏转。但是，如果您的支持产品需要更长的跨度和较少的固定点，则可以通过以下方法实现这一点：

　　In many cases, the higher the load you want, the shorter the allowed long span, because a shorter span can support more weight. A shorter span can also lead to less deflection. However, if your support product requires a longer span and fewer fixed points, you can do this by:

　　减少该跨度内每米允许的负荷。在已安装的产品上，所有已发布的负载都假定为均匀分布的负载。支撑跨度是在你的托盘或梯子上的吊架之间的距离。总体长度是支持产品的总长度，而不考虑“支持”的数量。

　　Reduce the allowable load per meter within the span. On installed products, all published loads are assumed to be evenly distributed. The support span is the distance between the hangers on your tray or ladder. The overall length is the total length of the supported product, regardless of the number of "supported" products.

　　总的来说只有合理的设计济南电缆桥架才能支撑起来，济南苏鑫电缆桥架多年生产经验，拥有设计团队，为您量身定制方案快来点击http://www.sxdlqj.com/product咨询吧

相关文章：济南电缆桥架厂家